设为首页加入收藏
视觉检测系统-罐视觉

视觉检测系统
分类:
    1.   基础盖/底盖检测系统;
    2.   成品盖检测系统;
    3.   异形盖检测系统;
    4.   罐身检测系统。
优点:
    1.   在线对缺陷进行100%检测;
    2.   可检测多种缺陷,如下:
          ◆  基础盖/底盖:缺角、双盖、缺胶、无胶、压痕、污点、划伤等;
          ◆  成品盖/异形盖:印刷有无、有无拉环、铆钉偏位、印刷偏移、盖面污点等;
          ◆  罐身:罐内脏污、罐身变形、焊缝漏补涂等。

Vision Inspection System
Classification:
     1.  for Basic shell/Bottom Cover.
     2.  for EOE.
     3.  for Special Shape Ends.
     4.  for Can Body.
Advantages:
     1.  Online 100% detection.
     2.  Can inspect lots of defects as following:
       ◆   Basic Shell/Bottom Cover: cut side, double shells, compound defect, no compound, dents/nicks, dirty/compound   on end, 
                 scratch, etc.
          ◆   EOE/ Special Shape Ends: printing with or without, tab with or without, rivet offset, printing offset,  dirty/compound on
                 end, etc.
          ◆   Can Body: inside dirt, can body deformation, weld seam defect, etc.

浏览 (16) | 评论 (0) | 评分(0) | 支持(0) | 反对(0) | 产品发布:管理员
将本产品加入收藏
 
 
 
 
图片
脚注信息
版权所有 Copyright(C)2012-2021 珠海市万隆达智能科技有限公司 Zhuhai MPE Intelligent Technology Co., Ltd  技术支持:珠海易搜互联